Signal Converters SSI and Parallel

Product Description

Signal converter FU210 / IV210 / PV210 / ZU210

 

  •  Multifunctional unit with several operating modes for incremental encoders or SSI absolute encoders

  •  For incremental encoders: Operating modes as frequency converter or position transducer (pulse counter) Universal incremental inputs (HTL/TTL/RS422) for NPN/PNP/NAMUR encoders and sensors Functions such as linkages (eg. A+B), scaling, filters, start-up bridging, … Input frequencies up to 1 MHz

  •  For SSI absolute encoders: Master or Slave operation with clock frequencies up to 1 MHz For single turn and multi turn encoders with SSI formats from 10 … 32 Bit Functions such as bit suppression, round-loop function, scaling, …

  •  For absolute and magnetostrictive position encoder with Start-Stop-Interface: Operating modes for master or slave, for position, angle and speed measurement

  •  16 bit analog output, configurable for voltage or current operation

  • RS232/RS485-interface for configuration and serial readout

  •  Extremely short conversion times

  • Linearization with 24 control points

  •  Auxiliary voltage output 5 and 24VDC for encoder supply

  •  Numerous connection options via 6 control inputs and 6 control outputs

  •  Compact rail housing to EN60715

  •  Easy parameterization via user interface OS 6.0 (Freeware)

 

 ______________________________________________________________________

IP251*: Converter from SSI to Parallel (BCD, Binary, Gray)
and SSI to Serial RS 232

[PDF manual]

  • SSI Signal converter suitable to convert SSI data from an absolute encoder or sensor to parallel data, either with Master or Slave operation

  • Also suitable for conversion of serial RS232 data to a parallel data format

  • 25 bits parallel outputs, push-pull and short-circuit-proof, programmable output codes: Binary, Gray or BCD

  • RS232 serial link for readout of sensor data

  • Multiple facilities for scaling and linearization of parallel output data

  • Easy to set up by DIL switches or by PC (operator software: see SUPPORT)

  • Power units for 115/230 VAC supply: see accessories

Converter SSI-parallel-seral RS232

 ______________________________________________________________________

PR210*: Converter from Parallel Data (BCD, Binary, Gray)
to Serial Data (RS 232,  RS485)

[PDF manual]

  • Parallel data input (5 decades BCD or 20 bit binary or Gray)

  • Serial RS232 / RS485 interface for readout of the parallel data

    by means of a PC or PLC or other controls

  • This converter is ideal for combinations with other motrona units in order to  accomplish display of parallel data or conversion to other formats like analogue or PROFIBUS etc.

  • Some typical examples of combinations are shown under

    “Combinations with Converters”

Converter Parallel-Serial RS232-RS485

Please note that also some of our SSI Indicator Units are suitable for conversion
from SSI to analogue and from SSI to serial (see “SSI Indicators”)

Signal Converters SSI and Parallel