The units shown below have been designed for simple remote indication and for easy parameter setting of process values with PROFIBUS or CANBUS networks |
| |
PB 306 : PROFIBUS Data Preset Unit
CA 306*: CANBUS Data Preset Unit | PDF manuals: |
PB 306 and CA 306 are simple preset units with front thumbwheel switches, for easy remote setting of single parameters (i.e. setspeed of a drive) via fieldbus.By pressing the ENTER button, the actual BCD setting will be transmitted to the selected register of the target unit as PDO or SDO (CANBUS) or hold in the polling register for readout (PROFIBUS)Standard housing 96 x 48 x 150 mm (3.78 x 1.89 x 5.90 ‘’)
| |
______________________________________________________________________ |
PB 340*: PROFIBUS Indicator (Display only)
CA 340 : CANBUS Indicator (Display only) | PDF manuals: |
PB 340 and CA 340 are simple indicator units for remote display of all actual data which are available on the network.The use of this display can provide remote operator information about any of the actual process or parameter settings, at any place around the machine.The CAN version is able to handle PDO objects as well as SDO objects.Standard housing 96 x 48 x 150 mm (3.78 x 1.89 x 5.90 ‘’)
| |
______________________________________________________________________ |
PB 541: PROFIBUS Combination (Indicator, Preset)
CA 541: CANBUS Combination (Indicator, Preset) | PDF manuals: |
PB 541 and CA 541 combine both, preset switch and indicator. Whilst the BCD switch allows to make register changes via PROFIBUS or CANBUS, the LED display provides information about the actual setting of the same or any other register value.Standard housing 96 x 72 x 150 mm (3.78 x 2.835 x 5.90 ‘’)
All units provide DIL switches on the rear side for settings of operational and communication parameters.GSD Files (PROFIBUS) and EDS Files (CANBUS) are available for download
under [Support] | |
