Product Description
V/F Control Drive
APPLICATIONS:
z Mixing
z Conveyors
z Extrusion and Injection Molding
z Machine Tools
z Winders / Unwinders
z Fans
z Packaging Machines
FEATURES:
Frequency Control
-Range: 0.01~400.00 Hz
-Setting resolution Digital: 0.01Hz, Analog: 0.06Hz/ 60Hz(10bits)
-Keypad setting: Set directly with▲▼ keys or the VR on the keypad
-Display Function: Five digital LED and status indicator: display frequency / Inverter parameter/ Fault Log/ Program Version
-External signal setting:
1. External potentiometer0-10V/ 0-20mA
2. Provides up/down controls, speed control or automatic procedure control with multifunctional contacts on the terminal block(TM2)
-Frequency Limit Function: Upper/lower frequency limits
General Control
-Carrier frequency: 1 ~ 12 kHz
-V/F pattern: 6 fixed patterns, 1programable curve
-Acc/Dec control: Acc/Dec time (0.1 ~ 3,600 seconds)
-Multifunction analog output: 4 functions (refer to description on 2-12)
-Multifunction input: 12 functions (refer to description on 01-00~01-04)
-Multifunction output: 6 functions (refer to description on 01-09)
-Other Functions:
Momentary Power Loss Restart, Overload Detection, 8 preset speeds， 2/3-wire Control, torque boost, Slip Compensation, Frequency Upper/ Lower Limit, Modbus slave and PC/PDA Link, Auto Restart.
– Communication Control:
1. Control by RS485
2. One to one or one to many (RS485 ONLY) control.
3. BAUD RATE/STOP BIT/PARITY/bit can be set
-Braking Torque: About 20﹪ , standard model the specified external braking resistors can provide 100%
-Operation temperature: 14-104℉ (-10 ~ 40℃ )
-Storage temperature: 4-140℉ (-20 ~ 60℃ )
-Humidity: 0 – 95% Relative Humidity(Non-condense)
-Vibration: 1G (9.8m/s2 )
-Enclosure: IP 20
Protective Functions
-FUSE protection: The motor stops after FUSE melt
-Over Voltage: 200V class: DC Voltage＞410V
-Under Voltage: 200V class: DC Voltage＜190V
-Momentary Power Loss Restart: Restart can be initiated with spin start .
-Other Function:
Over torque detection, error contact control, reverse prohibit, prohibit for direct start after power up and error recovery.
