Product Description

Signal converter FU210 / IV210 / PV210 / ZU210

  •  Multifunctional unit with several operating modes for incremental encoders or SSI absolute encoders

  •  For incremental encoders: Operating modes as frequency converter or position transducer (pulse counter) Universal incremental inputs (HTL/TTL/RS422) for NPN/PNP/NAMUR encoders and sensors Functions such as linkages (eg. A+B), scaling, filters, start-up bridging, … Input frequencies up to 1 MHz

  •  For SSI absolute encoders: Master or Slave operation with clock frequencies up to 1 MHz For single turn and multi turn encoders with SSI formats from 10 … 32 Bit Functions such as bit suppression, round-loop function, scaling, …

  •  For absolute and magnetostrictive position encoder with Start-Stop-Interface: Operating modes for master or slave, for position, angle and speed measurement

  •  16 bit analog output, configurable for voltage or current operation

  • RS232/RS485-interface for configuration and serial readout

  •  Extremely short conversion times

  • Linearization with 24 control points

  •  Auxiliary voltage output 5 and 24VDC for encoder supply

  •  Numerous connection options via 6 control inputs and 6 control outputs

  •  Compact rail housing to EN60715

  •  Easy parameterization via user interface OS 6.0 (Freeware)



IP251*: Converter from SSI to Parallel (BCD, Binary, Gray)
and SSI to Serial RS 232

[PDF manual]

  • SSI Signal converter suitable to convert SSI data from an absolute encoder or sensor to parallel data, either with Master or Slave operation

  • Also suitable for conversion of serial RS232 data to a parallel data format

  • 25 bits parallel outputs, push-pull and short-circuit-proof, programmable output codes: Binary, Gray or BCD

  • RS232 serial link for readout of sensor data

  • Multiple facilities for scaling and linearization of parallel output data

  • Easy to set up by DIL switches or by PC (operator software: see SUPPORT)

  • Power units for 115/230 VAC supply: see accessories

Converter SSI-parallel-seral RS232


PR210*: Converter from Parallel Data (BCD, Binary, Gray)
to Serial Data (RS 232,  RS485)

[PDF manual]

  • Parallel data input (5 decades BCD or 20 bit binary or Gray)

  • Serial RS232 / RS485 interface for readout of the parallel data

    by means of a PC or PLC or other controls

  • This converter is ideal for combinations with other motrona units in order to  accomplish display of parallel data or conversion to other formats like analogue or PROFIBUS etc.

  • Some typical examples of combinations are shown under

    Combinations with Converters

Converter Parallel-Serial RS232-RS485

Please note that also some of our SSI Indicator Units are suitable for conversion
from SSI to analogue and from SSI to serial (see “SSI Indicators”)